Below can be found pdfs and contour plots for the inferred parameters (h_0, phi_0, psi and cosiota) of all 10 pulsars injected into the first 4 days of the S3 run. The best fit values (along with actual values for the public pulsars) are tabulated.
| PSR0 | PSR1 | PSR2 | PSR3 | PSR4 |
|
|
|
|
|
|
| PSR5 | PSR6 | PSR7 | PSR8 | PSR9 |
|
|
|
|
|
|
| PSR | h_0 (actual h_0) | phi_0 (actual phi_0) | psi (actual psi) | cos(iota) | iota (actual iota) |
| PSR0 | 1.9e-24 (9.37979E-25) | 1.0 (2.656765759) | 0.47 (0.770087086) | -0.1 | 1.7 (0.651914595) |
| PSR1 | 8.3e-24 (8.49423E-24) | 2.8 (1.281150078) | -0.05 (0.35603553) | 1.0 | 0.0 (1.088517258) |
| PSR2 | 2.4e-23 (1.56171E-23) | 5.4 (4.03448663) | 0.73 (-0.221788475) | -0.4 | 2.0 (2.760167595) |
| PSR3 | 4.9e-23 (6.16125E-23) | 5.9 (5.5318207) | 0.42 (0.444280306) | -0.15 | 1.7 (1.651550679) |
| PSR4 | 9.7800e-22 (1.00641E-21) | 4.1 (4.826348844) | -0.6807(-0.647939117) | 0.3 | 1.3 (1.289791842) |
Below are the inferred values of h0 and phi0 for the 4 loudest injections (PSRs 3, 4, 8, 9). h0 and phi0 are shown being as they are the parameters furthest from the injected values.
| 
| 
| 
|
Inferred values of h0 are found to be consistently lower than the injected values in H1 and consistently
higher in H2. Values of phi0 are consistent between the 2 IFOs, but not with that injected (see table
below).
| PSR | detector | phi0_inj | phi0_fit | h0_inj | h0_fit |
| PSR4 | H1 | 4.83 | 1.87 | 1.01e-21 | 0.895e-21 |
| H2 | 1.71 | 1.15e-21 | |||
| PSR3 | H1 | 5.53 | 5.28 | 6.16e-23 | 5.42e-23 |
| H2 | 5.23 | 7.14e-23 | |||
| PSR8 | H1 | 5.24 | 5.43 | 6.02e-23 | 5.32e-23 |
| H2 | 5.52 | 6.86e-23 | |||
| PSR9 | H1 | 1.01 | 5.88 | 1.61e-23 | 1.51e-22 |
| H2 | 5.77 | 1.69e-22 |
We will be again testing our whole pipeline with simulated signals to check if any phase introduced during heterodyning and filtering.